Which manufacturer is better to choose to buy a Filter Press? This is something that every user who wants to invest in filter press equipment is very concerned about. Here it is recommended that you go to Dazhang Filtration to find out, many sand farm owners have used it and said it is good!

Here's what you should consider when buying filter press equipment:

1. Filtration area

This is important. After communicating with the user, the salesman calculates how much mud cake will be produced every day according to how much sewage the user has every day and how much mud is contained in the sewage. In combination with the parameters of the equipment, the equipment that meets the needs of the user is recommended.

2. Rack size

Generally 10-30 square meters, you can choose 630 racks; 30-60 square meters, choose 800 type rack; 80-120 square selection 1000 type rack; 120-250, choose 2500 rack; 300-500 square meters, choose 1500 type rack.

Some customers often ask, with the same filtration area and the same processing capacity, should I choose a smaller rack and a larger rack?

The answer is: no. For example, with the same 30 square filtration area, some manufacturers will recommend the 630 type, and some will recommend the 800 type. The price of the Model 630 will be lower than that of the Model 800. In fact, 800 is expensive, the larger the model, the larger the cylinder, plus the number of filter plates of the large model will be less than that of the small model (the total filtration area is the same, but the single plate filtration area is large, so the number is small), the frame is short, so the compression force is better. The compaction force is an important parameter of the filter press, and it is not easy to spray the slurry if the compaction force is large, and the feeding efficiency can also be adjusted. Therefore, when the salesman recommends, he will generally recommend a larger model of equipment to ensure the experience.

3. Bright and undercurrent

Generally, you can use the selected open stream, the effect is more intuitive, if the user has no special needs, it is generally recommended to use the open stream. Unless the user is in a special industry, there are special requirements or the material is volatile, etc., the undercurrent can be considered.

4. a filter cloth

The selection of filter cloth is very important, which is directly related to whether the filtrate is clear and whether the mud cake is dry. Therefore, after communicating with the customer service of Shenzhen Hongfa Environmental Protection Equipment Company, it will be found that the salesman often asks the user about the industry. According to the industry engaged in by the user, the approximate filter media belongs to the sludge of that nature, so as to combine the acid and alkali resistance of the filter cloth is recommended.

5. Automatic configuration

Common ones such as automatic pulling plates, many customers will choose, especially large models, manual pulling plates are very heavy. Small models are recommended to be pulled apart at one time, which is more efficient. Other common ones include automatic wetting flap (dripping at the lower edge of the filter plate), automatic filter cloth cleaning, and so on. The automatic configuration salesman generally tells the user with options when giving the quotation form.