An important parameter in the Filter Press model is the filtration area. Calculating the filtration area requires knowing the solid content of the effluent and the amount of effluent to be treated per hour, so as to calculate the volume and filtration area of the required filter press.

Mining wastewater with a solid content of 10%, with an hourly sewage volume of about 45 cubic meters, it is recommended to use a 1250 type/100 square Chamber filter press. The filter press completes a filter press in about 20 minutes, and the sludge output is 1.5 cubic meters, and if the sewage volume per hour is about 53 square meters, you can choose the 1250 type/150 square chamber filter press, which completes a filter press in about 24 minutes, and the sludge output is 2.6 square meters.

Mining wastewater with a solid content of 15%, with an hourly sewage volume of about 60 cubic meters, it is recommended to use a 1250 type/200 square chamber filter press. The filter press completes a filter press in about 30 minutes, and the sludge output is 3 square meters; If the sewage volume per hour is about 70 square meters, you can choose the 1250 type / 250 square box filter press, this type of filter press completes a filter press in about 35 minutes, and the sludge output is 3.75 square meters.

Mining wastewater with a solid content of 20%, with an hourly sewage volume of about 90 cubic meters, it is recommended to use a 1250 type/500 square chamber filter press. The filter press completes a filter press in 45 minutes, and the sludge output is 7.5 square meters; if the sewage volume per hour is about 100 square meters, you can choose the 1250 type/600 square chamber filter press, and the filter press completes a filter press in 55 minutes, and the sludge output is 10 square meters.