As an important solid-liquid separation equipment, diaphragm Filter Presses are widely used in chemical, mining, metallurgy and other industries. Correct maintenance and maintenance of the diaphragm filter press can extend the service life of the equipment and improve working efficiency. This article will introduce the daily maintenance methods and techniques of the diaphragm filter press.

The diaphragm filter press needs to use lubricating oil and hydraulic oil during its working process. Therefore, it is important to check the oil levels of lubricating and hydraulic oil regularly. If the oil level is too low, add it in time. At the same time, the diaphragm and filter membrane used for filtration are regularly replaced to avoid blockage affecting the normal operation of the diaphragm filter press.

The diaphragm filter press needs to be cleaned regularly. After use, turn off the power first and wipe the machine with a soft cloth or sponge dipped in warm water and a neutral detergent. Pay special attention to cleaning the surface of the machine and the pipes of the hydraulic station. The diaphragm filter press also needs to regularly check the working status of valves, sensors and electrical components. If any problems are found, they should be repaired or replaced in time.

Third, the diaphragm filter press needs to pay attention to the maintenance of the drainage system. During use, you should always pay attention to the normal operation of the drainage system. Regularly check whether the drainage overflow pipeline is blocked and clean up blocked areas. Regularly check the working status of the drain pump and drain valve to ensure their normal operation.

The diaphragm filter press also needs regular lubrication work. Lubrication can reduce wear and friction of the machine and improve the working efficiency of the equipment. After each operation of the diaphragm filter press, the machine should be lubricated regularly, especially for the lubrication of the power system, transmission system and sealing system. ｓｅｌｅｃｔ the appropriate lubricant and lubricate according to the instructions.

It is very important to regularly inspect and maintain the diaphragm filter press. Regular inspections can detect problems and solve them in a timely manner to prevent the occurrence of failures. During the inspection, check whether all pipes, valves and accessories are well sealed and whether there is abnormal noise and vibration. Regular maintenance can repair and ｒｅｐｌａｃｅ aged or worn parts to ensure the normal operation of the equipment.

The daily maintenance of the diaphragm filter press is the key to ensuring excellent equipment performance. By maintaining a good lubricating condition, regularly cleaning and checking the drainage system, and regular inspections and maintenance, the life of the equipment can be extended and work efficiency can be improved. In daily use, it must be operated and maintained strictly in accordance with the requirements of the instructions to ensure the normal operation of the diaphragm filter press.