High-pressure diaphragm Filter Press is a common separation equipment, widely used in chemical, environmental protection, food and other industries. When installing a high-pressure diaphragm filter press, the following environmental requirements need to be considered.

The temperature requirements of the installation environment are relatively loose, usually in the range of 5℃-40℃. This is because the high-pressure diaphragm filter press will generate a certain amount of heat during operation, which needs to be dissipated through a heat exchanger or air conditioning system. If the ambient temperature is too low or too high, it may affect the normal operation of the equipment and increase energy consumption.

The humidity requirements of the installation environment are relatively low. Generally speaking, the humidity should not exceed 85%. This is to avoid moisture in the electrical components inside or outside the equipment, resulting in equipment failure. For places with high humidity, it is recommended to conduct reasonable ventilation or install humidity control equipment.

There should be no corrosive gases or harmful substances such as dust in the air of the installation environment. Corrosive gases will corrode the metal structure and coating materials of the equipment, affecting the service life of the equipment; dust will clog the filter medium of the equipment and reduce the filtering effect. Therefore, before installing the high-pressure diaphragm filter press, the surrounding environment should be fully cleaned and dusted.

The ground in the installation area is required to be flat and firm, and able to withstand the weight of the equipment itself as well as the possible vibration and impact. The base of the equipment needs to be closely connected to the ground to ensure the stability and safety of the equipment. It is also necessary to pay attention to the space around the equipment to facilitate the installation, commissioning and maintenance of the equipment.

The installation environment of the high-pressure diaphragm filter press should also have fire-fighting facilities and corresponding safety measures. During the operation of the equipment, some unexpected situations may occur, such as equipment leakage, short circuit, etc. At this time, timely fire-fighting measures and safety emergency plans are particularly important.

Through the above environmental requirements, we can fully realize some key points that need to be paid attention to when installing a high-pressure diaphragm filter press. Remember, only by meeting these requirements can the normal operation and service life of the equipment be guaranteed, and the safety of the staff can also be guaranteed. I hope this article will be helpful to everyone.