The proper installation of the plate frame filter is an important step to ensure its normal operation and improve the filtration efficiency. The following will introduce the correct installation steps and precautions of the frame pressure filter machine.

Before installing the frame pressure filter, the venue needs to be prepared to ensure that the installation environment is clean and flat. Check whether the equipment is complete and non -damaged. Before installation, the equipment should be checked in a comprehensive inspection to ensure that each component is intact.

Then, place the plate frame filter at the installation position. According to the equipment size, ｓｅｌｅｃｔ the appropriate fixed method for fixed installation to ensure that the equipment is stable and not shaking. At the same time, it is necessary to pay attention to whether the related facilities such as drainage and power supply are complete and meet the requirements during the installation of the equipment.

Next, check and install the sealing pads of the board frame. Make sure the sealing gasket is intact and correctly installed to prevent leakage. If necessary, you can add lubricating oil and lubricate appropriately.

After installing the frame, the filter plate is required. In accordance with the installation requirements and operating guidelines provided by the equipment manufacturer, install the filter board one by one to the upper and lower sides of the board. During the installation process, be sure to pay attention to the installation location and direction of each pressure filter plate to ensure that the installation is correct.

After installing the filter plate, you need to connect the pressure pipe. Pay attention to check whether the pipeline connection is loose or leaked and ensure that the pressure pipeline connection is firm.

After the installation is completed, check each connection site of the device to ensure that there are no air leakage and oil leakage. Trial operation to ensure the normal work of the equipment.

During the operation, you need to pay attention to the following points. Adjust the pressure of the filter according to the actual situation to ensure its normal operation. Check the condition of the pressure filter plate and crimping cloth regularly, and change the problems in time. Maintain and repair the equipment regularly according to the operation to extend the service life of the equipment.

All in all, the correct installation of the plate frame filter is a key step to ensure its normal operation and improve the filtration efficiency. Prepare the installation site, check the integrity of the equipment, correctly install board frames and pressure pipes, and perform trial operation and regular maintenance. It is an important step to ensure the normal operation of the equipment. Only in the case of correct installation can the board frame filter machine play the best effect and improve the filtering efficiency in the production process.