High -voltage diaphragm filter is a device that is commonly used in solid -liquid separation, which is widely used in chemical, mining, food, pharmaceutical and other industries. As the use time is pushed, some solid particles and dirt will be deposited on the diaphragm and filter plate of the diaphragm. If it is not cleaned and maintained in time, it will not only affect the normal operation of the equipment, but also reduce the filtration effect and service life. Therefore, it is very important to regularly clean the high -pressure diaphragm filter.

Before cleaning, the safety state of the device should be confirmed. Turn off the power supply of the diaphragm pressure filter, empty the pressure in the filter room, and ensure that the equipment is in a state of control. The operator should wear personal protective equipment, such as gloves, protective glasses, etc. to ensure safety.

The first step of the cleaning high -pressure septum filter is to remove the filter plate. Use the tool to easily remove the filter plate and put it in the cleaning slot. A moderate amount of cleaning agent, such as alkaline cleaning agent or neutral cleaning agent, can be added to the cleaning tank, chose according to the actual situation. Soaking the filter plate in the cleaning solution can help remove the dirt and solid particles attached to the filter plate.

After the filter plate is soaked for a certain period of time, you can use a soft brush or cotton cloth to lightly wash the surface of the filter plate to completely remove the residual dirt. It should be noted that when brushing the filter plate, it should be gentle, and be careful to avoid damage to the surface of the filter plate during the brushing process.

After the filter plate is cleaned, you can remove it and rinse it with water. Make sure that there are no cleaning agents on the surface of the filter plate, so as not to affect future operations. After the cleaning is completed, hang the filter board in the ventilation, dry or dry it with a clean cloth.

The next step is to clean the diaphragm. The diaphragm is the core component of the high -pressure diaphragm filter machine, and you need to pay special attention to the details in the cleaning process.

Take out the diaphragm from the device and put it in the cleaning tank. Like the filter plate, an appropriate amount of cleaning agent can be added to the cleaning slot to help remove dirt and solid particles on the surface of the diaphragm. Similarly, let the diaphragm be soaked in the cleaning solution, which can improve the cleaning effect.

After soaking the diaphragm in the cleaning tank for a while, gently rub the surface of the diaphragm to remove the attached dirt and solid particles. Subsequently, the surface of the diaphragm was thoroughly washed with water to ensure that the cleaning agent was completely removed.

After the cleaning is completed, dry the diaphragm or dry it with a clean cloth, and then put it back to the device. Make sure the installation location of the diaphragm is correct to avoid affecting the operating effect of the equipment.

After cleaning the diaphragm, other components of the equipment should also be cleaned, such as the pressure rolling valve, pipeline, etc. You can use the corresponding cleaning agent and tools to ensure that the components of the equipment are in a clean state.

Cleaning high -voltage diaphragm filter is an important step in maintaining the normal operation of the equipment. By regular cleaning and maintenance, the filtering effect and service life of the equipment can be maintained to improve production efficiency and product quality. During the cleaning process, you must pay attention to safety, and choose the appropriate cleaning agent and tools according to the specific conditions of the equipment. Only by maintaining the cleaning and good maintenance of the equipment can the high -pressure septum filter machine always be in the best working state.